09-2014 R1 Graves Titanium Link Slipon


Retail Price: $1,099.00
Sale Price: $975.00
Product ID : graves09r1ls


09-2013 R1 Graves Link Slipon

Graves Motorsports LINK™ Cat Back Slip-on Titanium Exhaust System for the 2009-2013 Yamaha R1 with carbon fiber canisters. GMS LINK ™ Exhaust systems are designed for the elite rider seeking top of the line performance, fit, finish and value. This R1 exhaust system was developed using the same technology that has powered Monster Energy Graves Yamaha rider Josh Hayes to 3 consecutive AMA Superbike championships. 

We have a very particular map designed by Graves for the pcv.  In the customer comments of the order put "please map with custom graves map" if you order a pcv with this and we will load that map for you. It has extra columns for tuning for even more precision.  Designed by a join venture with Graves and Dynojet.

This combined kit features one part of the LINK™ exhaust system options for your R1 including the slip-on. Specifically built with the riders’ needs in mind this setup allow you to start with the combination that makes the most sense for you as a rider and your budget (along with conforming to regulations for your type of riding). You can purchase the cat replacement Y pipe and header seperately at any time to complete your LINK ™ performance package. 


  • New Diamond Shaped Can Designs (Carbon Fiber Cans with Carbon End Cap), designed to match the R1's body lines. Cans mounts directly to the sub-frame without the use of straps, saving weight and streamlining looks.
  • Constructed from Aerospace grade Titanium alloys
  • Machined joint fittings
  • Advanced welding process showcases laser perfection welds
  • 6.8lbs lighter than stock

Stock Cans Weight = 12lbs. LINK ™ Cat Eliminator System Weight = 5.2lbs (see break down below). 

Weight (Stock): 

  • Stock Header 4lbs
  • Stock Cat 7lbs
  • Stock Silencers 12lbs
  • Total = 19 lbs


Weight LINK ™ System: 

  • LINK ™ Header 3.4lbs
  • LINK ™ Cat Eliminator (Y-Pipe) 1.2lbs
  • LINK ™ Silencer Cans 5.2lbs
  • Total = 9.8 lbs

Stock DB at Idle 77db

Stock DB at 5000 rpm 88db

LINK ™ Silencer with optional sound insert (sold separately) at Idle 88db

LINK ™ Silencer with optional sound insert (sold separately) at 5000 rpm 99.5db


LINK ™ Silencer No inserts at Idle 91db

LINK ™ Silencer No inserts at 5000 rpm 103.5db

Fitment: Yamaha R1 2009-2013 


Comment on Facebook

Product Reviews

Login or Register to write a review.
Reviewed by
04/02/2013 - 10:45:50 PM
Best you can get
Got these for my 2011 R1, I paired it with an m4 y pipe, best sounding system out there.
R1's with Akrapovic full systems get put to shame!

Fit, Finish, Sound and Quality is the best out there if you've got an R1,
And the after sale support from both Motomummy and Graves has been outstanding!
Reviewed by
01/18/2013 - 11:37:45 PM
Graves R1 Link Slipons 09-13
These are extremely well made with first class carbon fibre. What I also like is that they mount up using the standard mounting points without the need for the usual bands/straps around the cans; this gives them a really good look. Naturally they are a much better look and design than the standard exhausts too. Well packaged and arrived in a matter of days to New Zealand. Fitting was straight forward with clear instructions. Designed to fit the standard Y pipe or the Graves version which removes the cat. They sound superb with a great burble on the over run. If you want to fit the baffles then these seem to be well thought out - a discreet rubber plug covers the bolt hole that would lock them in place. Quality and finish = 10/10 I've always used Akrapovics until now - but I'm fully converted to Graves, great stuff !

This product may contain chemicals known to the State of California to cause cancer andbirth defects or other reproductive harm. www.p65warnings.ca.gov